| MODEL | - |
- |
JW-120PET |
- |
| CLAMPING UNIT | - |
- |
- |
- |
| CLAMPING FORCE | ton |
- |
120 |
- |
| OPENING FORCE | - |
- |
12 |
- |
| CLAMPING FORCE | mm |
- |
360 |
- |
| MOLD HEIGHT(MIN-MAX) | mm |
- |
150~450 |
- |
| OPEN DAYLIGHT | mm |
- |
510~760 |
- |
| PLATEN DIMENSIONS | mm |
- |
610x610 |
- |
| DISTANCE BETWEEN TIE BARS | mm |
- |
410x410 |
- |
| HYDRAULIC EJECTOR FORCE | ton |
- |
3,9 |
- |
| HYDRAULIC EJECTOR STROKE | mm |
- |
100 |
- |
| INJECTION UNIT | - |
- |
- |
- |
| SHOT SIZE | gram |
212 |
||
| INJECTION CAPACITY | cm³ |
192 |
||
| SCREW DIAMETER | mm |
38 |
||
| PLASTICIZING CAPACITY | kg/saat |
49 |
||
| INJECTION RATE | cm³/san |
110 |
||
| INJECTION PRESSURE(max) | kg/cm² |
2443 |
||
| SCREW SPEED RANGE | dev/dak |
0~237 |
||
| SCREW TORQUE | kg-m |
89 |
||
| NOZZLE STROKE | mm |
325 |
||
| NOZZLE CONTACT FORCE | ton |
4 |
||
| HYDRAULIC UNIT | - |
- |
- |
- |
| PUMP CAPACITY | lt./dak: |
114 |
||
| SYSTEM PRESSURE | kg/cm² |
140 |
||
| OIL RESERVOIR CAPACITY | lt. |
283,5 |
||
| ELECTRIC UNIT | - |
- |
- |
- |
| POWER SUPPLY( STANDARD) | volt |
220 |
||
| MOTOR RATED | HP(kw) |
- |
25(18,6) |
- |
| NUMBER OF HEAT CONTROL ZONES | bölge |
4 |
||
| HEATING WATTAGE | kw |
8,29 |
||
| GENERAL SPECIFICATION | - |
- |
- |
- |
| WATER REQUİREMENTS(max) | lt./dak |
42,56 |
||
| MACHINE DIMENSIONS(LxWxH) | m |
- |
4.62x1.28x1.7 |
- |
| MACHINE WEIGHT | kg |
4500 |
||
| HOPPER CAPACITY | kg |
50 |
||
