| MODEL | - |
JW-220PET |
| CLAMPING UNIT | - |
- |
| CLAMPING FORCE | ton |
220 |
| OPENING FORCE | - |
22 |
| CLAMPING FORCE | mm |
500 |
| MOLD HEIGHT(MIN-MAX) | mm |
150~550 |
| OPEN DAYLIGHT | mm |
650~1050 |
| PLATEN DIMENSIONS | mm |
780x780 |
| DISTANCE BETWEEN TIE BARS | mm |
520x520 |
| HYDRAULIC EJECTOR FORCE | ton |
5,3 |
| HYDRAULIC EJECTOR STROKE | mm |
150 |
| INJECTION UNIT | - |
- |
| SHOT SIZE | gram |
681 |
| INJECTION CAPACITY | cm³ |
617 |
| SCREW DIAMETER | mm |
55 |
| PLASTICIZING CAPACITY | kg/saat |
132 |
| INJECTION RATE | cm³/san |
175 |
| INJECTION PRESSURE(max) | kg/cm² |
2483 |
| SCREW SPEED RANGE | dev/dak |
0~187 |
| SCREW TORQUE | kg-m |
222 |
| NOZZLE STROKE | mm |
395 |
| NOZZLE CONTACT FORCE | ton |
6,6 |
| HYDRAULIC UNIT | - |
- |
| PUMP CAPACITY | lt./dak: |
187 |
| SYSTEM PRESSURE | kg/cm² |
140 |
| OIL RESERVOIR CAPACITY | lt. |
567 |
| ELECTRIC UNIT | - |
- |
| POWER SUPPLY( STANDARD) | volt |
220 |
| MOTOR RATED | HP(kw) |
50(37,3) |
| NUMBER OF HEAT CONTROL ZONES | bölge |
5 |
| HEATING WATTAGE | kw |
16,4 |
| GENERAL SPECIFICATION | - |
- |
| WATER REQUİREMENTS(max) | lt./dak |
71,1 |
| MACHINE DIMENSIONS(LxWxH) | m |
6.07x1.5x1.93 |
| MACHINE WEIGHT | kg |
7600 |
| HOPPER CAPACITY | kg |
50 |
