| MODEL | - |
- |
WG-125C |
- |
| CLAMPING UNIT | - |
- |
- |
- |
| CLAMPING FORCE | ton |
- |
125 |
- |
| CLAMPING STROKE | mm |
- |
420 |
- |
| MOLD HEIGHT( min-max) | mm |
- |
200~450 |
- |
| DISTANCE BETWEEN TIE-BARS | mm |
- |
450x450 |
- |
| HYDRAULIC EJECTOR FORCE | KN |
- |
40 |
- |
| HYDRAULIC EJECTOR STROKE | mm |
- |
100 |
- |
| INJECTION UNIT | - |
A |
B |
C |
| SHOT WEIGHT | gram |
258 |
328 |
404 |
| INJECTION CAPACITY | cm³ |
276 |
350 |
432 |
| SCREW DIAMETER | mm |
40 |
45 |
50 |
| PLASTICING CAPACITY | g/s |
13 |
19 |
25 |
| INJECTION RATE | g/s |
113 |
143 |
176 |
| INJECTION PRESSURE | Mpa |
215 |
170 |
137 |
| SCREW SPEED RANGE | dev/dak |
- |
6~215 |
- |
| SCREW L/D RATIO | L/D |
23.6 |
21 |
18.9 |
| HYDRAULIC UNIT | - |
- |
- |
- |
| PUMP CAPACITY | lt./dak. |
- |
91 |
- |
| ELECTRIC UNIT | - |
- |
- |
- |
| POWER SUPPLY(STANDARD) | volt |
- |
220 |
- |
| MOTOR RATED | (kw) |
- |
15 |
- |
| HEATING WATTAGE | kw |
- |
9.1 |
- |
| GENERAL | - |
- |
- |
- |
| MACHINE DIMENSION | m |
- |
4.70x1.27x1.88 |
- |
| MACHINE WEIGHT | kg |
- |
4800 |
- |
| HOPPER CAPACITY | kg |
- |
25 |
- |