| MODEL | - |
- |
WG-800C |
- |
| CLAMPING UNIT | - |
- |
- |
- |
| CLAMPING FORCE | ton |
- |
800 |
- |
| CLAMPING STROKE | mm |
- |
1000 |
- |
| MOLD HEIGHT( min-max) | mm |
- |
400~950 |
- |
| DISTANCE BETWEEN TIE-BARS | mm |
- |
1000x1000 |
- |
| HYDRAULIC EJECTOR FORCE | KN |
- |
200 |
- |
| HYDRAULIC EJECTOR STROKE | mm |
- |
230 |
- |
| INJECTION UNIT | - |
A |
B |
C |
| SHOT WEIGHT | gram |
2894 |
3573 |
4323 |
| INJECTION CAPACITY | cm³ |
3180 |
3927 |
4751 |
| SCREW DIAMETER | mm |
90 |
100 |
110 |
| PLASTICING CAPACITY | g/s |
72 |
85 |
100 |
| INJECTION RATE | g/s |
533 |
510 |
738 |
| INJECTION PRESSURE | Mpa |
210 |
170 |
140 |
| SCREW SPEED RANGE | dev/dak |
- |
0~130 |
- |
| SCREW L/D RATIO | L/D |
22.2 |
20 |
18.2 |
| HYDRAULIC UNIT | - |
- |
- |
- |
| PUMP CAPACITY | lt./dak. |
- |
530 |
- |
| ELECTRIC UNIT | - |
- |
- |
- |
| POWER SUPPLY(STANDARD) | volt |
- |
220 |
- |
| MOTOR RATED | (kw) |
- |
45X2 |
- |
| HEATING WATTAGE | kw |
- |
47 |
- |
| GENERAL | - |
- |
- |
- |
| MACHINE DIMENSION | m |
- |
10.25x2.6x2.6 |
- |
| MACHINE WEIGHT | kg |
- |
45000 |
- |
| HOPPER CAPACITY | - |
- |
- |
- |